This Is The Ultimate Tool Kit Bundle For The Glock® Armorers And Enthusiasts.

VISM BY NCSTAR GLOCK PRO TOOL

• Handle has rubberized textured panels
• Tool bits can be stored inside the hollow
• Magnetic 3/16” hex nut driver for the front sight
• Channel liner removal tool
• Hardened steel 3/32” (2.5mm) disassembly tool
• Channel liner install tool
• Flat blade and Phillips screwdriver bit.
• The tool handle has a cavity for holding the firing pin and spacer in place for easier assembly/ disassembly of the firing pin spring and spring cups.
• U.S. PAT. D891896

VISM BY NCSTAR GLOCK DISASSEMBLY TOOL/BLUE

• Tool designed in a pen configuration with a steel disassembly and front sight tool .
• Anodized blue aluminum pen tool with two threaded caps that thread into the center body, with a black steel pocket clip.
• Hardened steel 3/32″ or 2.5mm punch tool for all . Designed to remove the pins and disassemble the Glock® frame, slide, and the magazine into their individual components.
• The opposite end of the tool includes a 3/16″ hex nut driver for removing/installing factory and aftermarket Glock® front sights. The 3/16″ hex nut driver features an internal magnet to conveniently hold the front sight screw as you install the front sight post.
• The pointed cap can be used to center the pins in the frame. Pointed cap can be screwed onto the pocket clip cap to prevent losing it when the tool is in use.

MAGPOPPER MAGAZINE DISASSEMBLY TOOL- GLOCK

• The innovative MagPopper tool will help you disassemble your Glock® magazines in seconds.
• Works with most factory Glock® flat floorplates. Works with 10 round, standard capacity, and high capacity Glock® magazines.
• Simply insert the hook from the small lever into the floor plate, rest the MagPopper body against the front of the magazine body. With one hand grasp the MagPopper and the magazine body and gently squeze. The floor plate will slide forward and unlock from the side magazine tabs with very little effort.
• Caution magazines are under spring tension. After you have unlocked the floor plate, carefully slide/remove the floor plate, locking plate, spring, and follower from the magazine body for service/cleaning.
• MagPopper also features: a bottle opener, a hole on the main body for mounting onto key rings, and a ¼” hex hole for holding ¼” screwdriver bits.
• Compact design for convenient storage.
• Steel construction.

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither NcSTAR Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.